How to Use Your First DSLR Camera | Guide For Beginners
If you’ve bought yourself the best DSLR camera (or mirrorless camera) and, after unpacking it from the box, you are intimidated by the number of buttons and dials, and by the thickness of the manual, it can be very tempting to put the manual down, flick it onto ‘Auto’ and start shooting.
Whilst that is fine for some, it may not be long until you crave the creative control that inspired you to purchase a DSLR in the first place, but where do you begin?
On the off chance that you view yourself as a novice who is uncertain of how to benefit as much as possible from your camera, this post is intended for you. It's proposed to be short, an all-inclusive resource to help you take your camera off auto, and assume responsibility for your DSLR. It isn't proposed to be a substitution for your camera manual, so won't clarify every setting in incredible profundity, however will cover enough of the rudiments to oversee your camera, and give you the critical points to return to your manual to peruse.
Steps for Learning How to Use Your DSLR Include:
Here are some steps for learning how to use that new DSLR that we’ll cover in this article.
- Master Shooting modes (including priority modes and full manual)
- Understand ISO
- Learn the ‘exposure triangle’
- Master Metering including exposure compensation
- Learn About Focussing
- Understand file size/types
- Learn about White balance
There is a lot to learn if you want to get the most from your DSLR but let us start by digging into each of these topics.
Note to Mirrorless Camera Owners: almost everything in this article is relevant not only to DSLR owners but also mirrorless camera owners too!
Master Shooting Modes
The best place to start is with shooting modes. The shooting modes will no doubt be found on a dial marked with 'auto, Av, television, P, M' and perhaps more. Choosing a shooting mode will decide how your camera acts when you press the screen, for instance, when 'auto' is chosen, the camera will decide everything to do with the openness, including the gap and shade speed. Different modes, 'Av, television, P, M', are there to give you control:
Try not to stress if your mode dial looks somewhat changed; changed producers utilize various shortenings for the shooting modes. Your mode dial may have the letters 'A, S, P, M' (rather than Av, television, P, M), yet they all capacity similarly. Underneath, I have given every condensing for the given mode.
Aperture Priority (Av or A)
Gap need can be considered as a 'self-loader' shooting mode. At the point when this is chosen, you as the picture taker set the opening and the camera will naturally choose the shade speed. So what is the gap and when might you need to control it?
The gap is the size of the opening in the focal point through which light is permitted to pass at whatever point the shade is opened – the bigger the gap, the more light goes through.
The gap is estimated in 'f-stops' and is normally shown utilizing an 'f-number', for example, f/2.0, f/2.8, f/4.0, f/5.6, f/8.0, etc a proportion of central length over the measurement of the opening. Consequently, a bigger gap (a more extensive opening) has a more modest f-number (for example f/2.0) and a more modest gap (a smaller opening) has a bigger f-number (for example f/22). Lessening the opening by one entire f-stop, for example, f/2.0 to f2/8 or f/5.6 to f/8.0, parts the measure of light entering the camera.
The opening is perhaps the main part of photography as it straightforwardly impacts the profundity of the field – that is, measuring a picture in the center. A huge profundity of field (accomplished by utilizing a little opening (huge f-number)) would imply that a huge distance inside the scene is in the center, for example, the frontal area to the foundation of the scene following.
Though a shallow profundity of field (accomplished by utilizing a huge opening (little f-number)) would deliver a picture where just the subject is in the sharp center, yet the foundation is delicate and out of core interest. This is regularly utilized when shooting representation or untamed life, for example, the picture beneath, to segregate the subject from the foundation:
So when utilizing opening need, you can deal with your profundity of field, while the camera deals with the rest.
Shutter Priority (Tv or S)
Similar to aperture priority, this is another ‘semi-automatic’ shooting mode, though, in this instance, you as the photographer set the shutter speed and the camera will take care of the aperture.
The shade speed, estimated in a moment or (at least two frequently parts of a second), is the measure of time the screen stays open when snapping a picture. The more drawn out the shade stays open, the more light goes through to the sensor to be caught.
You would choose a short shade speed if you needed to freeze a quick subject, like shooting sports, activity or untamed life, for instance:
You would utilize a long shade speed on the off chance that you needed to obscure a moving subject, for instance, water surging over a cascade (more slow screen rates will expect you to put the camera on a stand to guarantee the camera is held consistent while the shade is open):
So while you stress over what screen speed you need for a given photo, the camera will decide the suitable gap needed to give the right openness.
Gap and shade need shooting modes might be self-loader, implying that some may mock their utilization since they're not completely manual, anyway they are unbelievably valuable modes to shoot in that can give you enough imaginative control to catch scenes as you conceive them.
Program mode is almost halfway between the semi-automatic modes of aperture/shutter priority and full manual control. In program mode, you can set either the opening or screen speed, and the camera will keep up the right openness by changing the other one in like manner, for example as you change the gap, the screen speed will consequently change, and the other way around. This gives you the extra opportunity that utilizing either gap need or shade need can't give without exchanging between shooting modes.
Manual mode is exactly what it sounds like, you are given full control over the exposure determination, setting both the aperture and shutter speed yourself. There will be an openness pointer either inside the viewfinder or on the screen that will disclose to you how under/over uncovered the picture will be, notwithstanding, you are left to change the shade speed and gap yourself to guarantee you accomplish the right openness.